Stranski Girl

My next project is on the bench. I’ve been drooling over some of these kits for awhile and I finally pulled the trigger. I picked it up from Industria Mechanika and it arrived in two days. Take a look at some of the short run kits they sell. I’m not being paid to say that,Continue reading “Stranski Girl”

Completed – An Ancient and Terrible Dice Tower

Welcome back, folks! I’m glad to have this dice tower wrapped up! It provided a lot of challenges and required me to use materials and techniques that were new to me. I’ve put a ton of photos on this post so I’ll just jump right in. Descriptions will follow underneath each photo as a how-to.Continue reading “Completed – An Ancient and Terrible Dice Tower”

Spare Parts Bin

I thought I’d throw together something real quick. It’s been a couple of weeks of hectic work and I missed my self-imposed weekly deadline. I’ve started going back to school for digital media and I’ve spent the last four weeks learning HTML and CSS. It’s changed quite a bit since I last did it inContinue reading “Spare Parts Bin”

An Ancient Terrible Tower – Part 1

This venture was recommended to me by a friend.  He’s looking for a dice tower to use while playing Ancient Terrible Things.  I’ve never played it, but the artwork looks awesome, so I readily agreed to the project.  One drawing shows a stony cliff with a skull carved out of the rock.  With that pictureContinue reading “An Ancient Terrible Tower – Part 1”

Heavy Freight Part 1

I am slightly modifying a 1/35 German kitchen trailer from MiniArt.  I’m dumping the kitchen equipment and replacing it with a balsa wood trailer.  You’ll find out what’s going on it soon enough! I’m using XPS foam for the base.  It will house the horse and cart on a muddy trail.  To get a nice,Continue reading “Heavy Freight Part 1”

The Dogan Part 1

This project is a work in progress, tying together 3D printing, a model kit, and base building.  It is a dark future that takes place in this world or one not too terribly far along the beam as this one.  There are relics of a world gone by strewn across the landscape and not allContinue reading “The Dogan Part 1”

The M113 Part 3

I’m waiting on the Ukrainian postal service to send me the figures that will complete this project.  As a result, this will be the last post for awhile concerning the M113.  I’ll rustle something else up to keep me busy until then.  I’d just gotten the chipping done last you saw the vehicle.  At thisContinue reading “The M113 Part 3”

A Scale of a Tale

Nothing ruins a diorama faster than an out of scale item (except a turpentine spill!).  The immersion is spoiled, and the out of sorts item becomes the focus of the scene.  So, save the poor size estimation for closing time and try this technique for scratch-built scale.  Specifically, I’ll show you how I scaled someContinue reading “A Scale of a Tale”

The M113 Part 2

When we last left, our hot dog-fingered protagonist was trying to super glue tiny metal shavings onto a hunk of plastic.  Did he succeed? What is he doing now?  What’s the next step?  Stay tuned to find out! Most of the photo etch in place, I gave everything a coat of primer through the airbrush. Continue reading “The M113 Part 2”

The M113 and the Never Ending PE

Building model kits going a little too smoothly for you?  Finally decoded all the symbols in the directions?  Honed your build order to the maximum efficiency?  Well, why not try adding a Photo Etch set to your next build!  It is sure to drive you crazy and double the time you spend on your kneesContinue reading “The M113 and the Never Ending PE”